Download RouterOS 6.47.1

MikroTik has released version 6.47.1 of RouterOS, an operating system that focuses on running router tasks. This includes routing network traffic, of course, but also bandwidth management, a firewall, controlling wireless access points, a hotspot gateway and a VPN server. It can be done on the hardware from MikroTik when doing its job on x86 or virtual machines. Before use, a license required, which is included with the purchase of MikroTik hardware. The changelog for this release looks like this:

What’s new in 6.47.1:

• crs3xx – fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47)
• crs3xx – fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47)
• crs3xx – improved Ethernet port group traffic forwarding for CRS354 devices
• defconf – fixed default configuration generation on devices without “wireless” package installed
• defconf – fixed default configuration loading on RBmAPL-2nD
• defconf – improved default configuration generation on devices with changed wireless interface names
• dhcpv6 server – disallow changing binding’s “prefix-pool”
• dhcpv6-server – improved stability when changing server for static bindings
• dns – do not allow setting “forward-to” same as “name” or “regex”
• dns – do not allow setting zero value IP addresses for “A” and “AAAA” records
• dns – do not use DoH for local queries when a server is specified
• export – fixed HotSpot “address-per-mac” parameter export
• filesystem – fixed increased “sector writes” reporting (introduced in v6.47)
• ftp – fixed possible buffer overflow
• ike2 – fixed initiator child SA init without policy
• ike2 – fixed policy reference for pending acquire
• ike2 – retry RSA signature validation with deduced digest from certificate
• ipsec – do not update peer endpoints for generated policy entries (introduced in v6.47)
• lora – added “spoof-gps” parameter for fake GPS coordinate sending
• lora – fixed JSON statistics inaccuracies
• lte – added support for MTS 8810FT
• lte – fixed modem initialization when multiple modems are used simultaneously
• lte – fixed PDP authentication configuration for SIM7600
• metrouter – fixed image importing (introduced in v6.46)
• ospf – improved route tag processing for OSPFv3
• ppp – allow specifying pool name for “remote-ipv6-prefix-pool” parameter
• profile – fixed “unclassified” load reporting on PowerPC devices (introduced in v6.47)
• qsfp – fixed auto-negotiation status
• qsfp – ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47)
• routerboard – fixed “mode-button” support on SMIPS devices (introduced in v6.47)
• routerboard – fixed “reset-button” menu presence on all devices
• supout – added “LoRa” section to supout file
• switch – fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips
• w60g – added “mdmg-fix” parameter for RBwAP60Gx3 (CLI only)
• winbox – fixed flag displaying under “IP/DNS/Static” table
• winbox – fixed minor typo in “BGP/Peer” menu
• winbox – hide irrelevant switch port parameters
• wireless – changed “station-roaming” default setting from “enabled” to “disabled”
• wireless – updated “bangladesh” regulatory domain information
• wireless – updated “egypt” regulatory domain information