Download RouterOS 6.44.3

MikroTik has released RouterOS 6.44.3. RouterOS is an operating system that focuses on running router tasks. This includes routing network traffic, of course, but also a firewall, bandwidth management, controlling wireless access points, a hotspot gateway and a VPN server. It can be done on the hardware from MikroTik when doing its job on x86 or virtual machines. Before use, a license required, which is included with the purchase of MikroTik hardware. The list of changes for this release is as follows:

What’s new in 6.44.3

• certificate – fixed SAN being duplicated on status change (introduced in v6.44);
• conntrack – fixed “loose-tcp-tracking” parameter not taken in action (introduced in v6.44);
• dhcpv4 server – fixed commenting option for alerts;
• dhcpv6 server – fixed binding setting update from RADIUS;
• ike1 – improved stability for transport mode policies on initiator side;
• ipsec – fixed freshly created identity not taken in action (introduced in v6.44);
• ipsec – fixed possible configuration corruption after import (introduced in v6.44);
• ipv6 – adjusted IPv6 route cache max size;
• ipv6 – improved IPv6 neighbor table updating process;
• lte – reset LTE modem only when SIM slot is changed on dual SIM slot devices;
• rb2011 – removed “sfp-led” from “System/LEDs” menu;
• smb – fixed possible buffer overflow;
• snmp – added “radio-name” (mtxrWlRtabRadioName) OID support;
• ssh – added “both”, “local” and “remote” options for “forwarding-enabled” parameter;
• ssh – do not generate host key on configuration export;
• ssh – fixed multiline non-interactive command execution;
• switch – fixed possible crash when interface state changes and DHCP Snooping is enabled;
• userman – updated authorize.net gateway DNS name;
• wireless – added support for US FCC UNII-2 and Canada country profiles for LHG-5HPnD-US, RBLHG-5HPnD-XL-US and SXTsq5HPnD-US devices;
• wireless – improved wireless country settings for EU countries;

What’s new in 6.44.2

• ipv6 – fixed soft lockup when forwarding IPv6 packets;
• ipv6 – fixed soft lockup when processing large IPv6 Neighbor table;
• ipv6 – adjust IPv6 route cache max size based on total RAM memory;

What’s new in 6.44.1

• bridge – fixed possible memory leak when using “ingress-filtering=yes” on bridge interface;
• certificate – force 3DES encryption for P12 certificate export;
• dhcp – fixed dual stack queue addition;
• dhcpv6-server – use MAC address for RADIUS user when “allow-dual-stack-queue=yes”;
• email – fixed missing “from” address for sent emails (introduced in v6.44);
• gps – increase precision for dd format;
• gps – removed unnecessary leading “0” for dd format;
• ipsec – allow identities with empty XAuth login and password if RADIUS is enabled (introduced in v6.44);
• ipsec – fixed dynamic L2TP peer and identity configuration missing after reboot (introduced in v6.44);
• ipsec – use “remote-id=ignore” for dynamic L2TP configuration (introduced in v6.44);
• ipv6 – do not allow setting “preferred-lifetime” longer than “valid-lifetime”;
• lte – do not show “session-uptime” if session is not up;
• lte – fixed LTE interface band setting on RBSXTLTE3-7 (introduced in v6.44);
• rb4011 – fixed ether10 failing to auto negotiate link speed to 1Gbps;
• winbox – added “use-local-address” parameter in “IP/Cloud” menu;
• wireless – fixed antenna gain setting on RBSXT5nDr2;