Download RouterOS 6.42.2

By admin On May 18, 2018

Spread the love

MikroTik has released RouterOS 6.42.2. RouterOS is an operating system that focuses on the execution of router tasks think of routing network traffic, but also a firewall, bandwidth management, controlling wireless access points, a hotspot gateway and a vpn server. It can work on the hardware by MikroTik as well as on x86 or virtual machines. A license which is included in the purchase of MikroTik hardware, is required for use. The list of changes for this release is as follows:

What’s new in 6.42.2:

bridge – do not allow to add same interface to bridge more than once;

bridge – fixed LLDP packet

bridge – fixed processing or fragmented packets when hardware offloading is enabled;

console – fixed type “on” and “wireless status” LED trigger value setting (introduced in v6.42.1);

crs317 – fixed link flapping when inserted S + RJ10 module without any cable;

defconf – fixed wAP LTE kit default configuration;

dhcpv4 – prevent sending out ICMP port unreachable packets;

dhcpv4 client – fixed DHCP client stuck in renewing state;

dhcpv6-relay – fixed missing configuration after reboot;

filesystem – fixed NAND memory going into read-only mode;

hotspot – fixed user authentication when queue from old session is not removed yet;

interface – fixed “built-in = no” parameter for manua lly created interface lists;

interface – fixed “dynamic” built-in interface list behavior;

interface – fixed interface list which include disabled member;

interface – fixed interface list which include / exclude another list; 19659004] interface – fixed interface configuration responsiveness;

ipsec – fixed policies becoming invalid

ipsec – improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;

led – added “dark -mode “functionality for hAP ac and hAP ac ^ 2 devices;

lte – improved LTE communication process on MMIPS platform devices;

quickset – fixed dual radio mode detection process;

router board – properly represent board name for hap ac ^ 2;

tile – fixed Ethernet interfaces becoming unresponsive;

winbox – allow to specify “any” as wireless “access-list” interface;

winbox – fixed “/ ip dhcp-server network set dns-none “parame

wireless – enable all chains by default on devices without external antennas after configuration reset;

wireless – fixed packet processing when “static – algo – 0 = 40bit – wep” is being used (in v6.42 )

wireless – fixed usage of allowed signal strength values received from RADIUS

wireless – improved wireless throughput on hAP ac ^ 2 and cAP ac;

x86 – fixed reboot caused by MAC Winbox connection; [19659033]