Galileo has accuracy of less than 40cm, but not for smartphones

The Galileo positioning service now has an accuracy of less than 40cm, depending on the connected device. This will not yet work with smartphones. Drones and autonomous cars, among others, could use the extra accuracy.

The Galileo satellites have been supporting high accuracy service since Tuesday, requiring the positioning service to have a vertical accuracy of 40cm and a horizontal accuracy of 20cm. Without has, the service is meter accurate. ESA claims that Galileo is the first satellite service that supports has and therefore has such high accuracy. Has is free to use.

Has does not currently work on most consumer devices as the service operates on the e6 satellite band. According to ESA, this requires high-end equipment. Although the space agency also says that the service should be available via the internet, so that consumer devices could eventually use it.

The European Union Agency for the Space Program EUSPA was involved in the project and says that has mainly been developed for surveying, precision farming and civil engineering. “New and emerging applications such as autonomous cars, driverless vehicles and robotics” would also benefit from has, the agency said.

Has works by using a high accuracy data generator in Italy that generates additional corrections for Galileo and GPS. These corrections are sent in real time to Galileo satellites, which in turn send the data over the e6 band to supported devices, with single messages at 448 bits per second. For example, information about satellite orbits is updated every thirty seconds and satellite clocks are adjusted every ten seconds. For example, the information about the Galileo satellites must become more accurate and so must the location determination. ESA says it wants to make Galileo-has even more accurate, but needs extra ground stations for this. The infrastructure is still being upgraded for this.