Download Firmware Sigma SD1 1.10

Sigma has for its digital cameras of the type SD1 firmware version 1.10 made available. These cameras are equipped with a Foveon X3 image sensor and have 46 megapixels according to Sigma, although it should be noted that it is actually a 15.3-megapixel sensor, which uses the colors red, green and blue not next to each other, but in layers. measure. In addition, the cameras can be equipped with different lenses with a Sigma SA bayonet mount. The list of changes since the previous entry in the Meuktracker shows us the following:

Version 1.10:

• It is possible to create B/W images in RAW or RAW+JPEG mode.
• It has refined the AF algorithm and improved the AF operation accordingly. It is especially effective for those lenses from our new product lines; Art, Contemporary and Sports.
• It has improved the accuracy of flash light control of the built-in flash, ELECTRONIC FLASH EF-610 DG SUPER SA-STTL, ELECTRONIC FLASH EF-610 DG ST SA-STTL and ELECTRONIC FLASH MACRO EM-140 DG SA-STTL.
• It enables the Custom Mode to save the shutter speed and the aperture value of manual exposure.
• It corrects the phenomenon that the operation of the camera very occasionally becomes unstable when the battery is low.
• It happened only when the exposure information in the display disappears after restarting from Auto-power off. It corrects the rare phenomenon that the AF button does not work in case it is the first button pressed after restarting the camera operation from Auto-power off.
• It corrects the rare phenomenon that the lens ID is not recognized properly. It is reported only with some lenses from the new product line; Art, Contemporary and Sports.
• It corrects the phenomenon that the user selects “Camera Control” in the “USB Mode”, and then goes on to set “Continue” in the “Setting of AEL button” but the setting gets cancelled.

Caution:

• Once you update the firmware of SD1 to Ver. 1.10, it is necessary to install Sigma Photo Pro 5.5 to develop the RAW images. The previous versions (Sigma Photo Pro 5.4.1 or earlier) cannot process it properly.
• This firmware update requires two files, SD1U_110.BIN and SD1V_110.BIN. First, please download and save those files on a CF card.
• For firmware Ver. 1.08 or earlier, there are 2 steps to complete the firmware update. Once you finish the first step (STEP 01 – STEP 10), please proceed to the second step (STEP 11 – STEP 14).
• NOTICE OF FUNCTION CHANGE (PDF:102 KB)

Version 1.09:

• Accuracy of Auto Focus is improved by enhancement of the algorithm.
• Enables the setting of the ISO Sensitivity in steps of 1/3 EV.
• Enables the setting of the Lower limit and Upper limit of the ISO Sensitivity in ISO Auto mode.
• Adds “FOV Classic Blue” to Color mode.
• Enables the Quick Set menu items to be changed using the A-dial or S-dial.
• NOTICE OF FUNCTION CHANGE (PDF:461 KB)

Version 1.08:

• Improved accuracy with evaluative exposure metering.

Version 1.07:

• Improved start up speed.
• Allows a dedicated external flashgun to be used in manual mode whilst the camera is in mirror up mode.
• The phenomenon of the LCD display showing minor fuzziness immediately after start-up is corrected.
• Various bugs have been corrected to achieve more stable operation.

Version 1.06:

• Accuracy of Auto Focus has been improved.
• Accuracy of flashgun light control has been improved.
• Various bugs have been corrected to achieve more stable operation.

Version 1.05:

• It is not necessary to run “Update Lens Information” in order to update the lens information in the camera.
• Accuracy of Auto Focus has been improved.
• Accuracy of evaluative metering is improved in the backlight or low light conditions.
• Various bugs have been corrected to achieve more stable operation.