Download Firmware Linksys WAG160N 1.00.10

By admin On Mar 2, 2009

Spread the love

Linksys has released new firmware for the WAG160N router. The update can be recognized by version number 1.00.10 and has been this link click to download bin file. In version 1.00.10, a dozen improvements have been made, including in the WAG160N’s WAN and WLAN software. The full changelog looks like this:

1.00.10

HNAP: FW writes settings back to flash when doing HNAP Getxxx.

Outbound SIP call dropped in 25 seconds at sipphone.com, CBO, SIP.

Web administrator username should be case insensitive, CBO, username

HNAP SetMACFilter2: FW allows a multicast MAC address FF:0B:DC:6F:FE:01, CBO, HNAPHnap wireless channel issue

HNAP SetMACFilter2: FW allows duplicated MAC addresses, CBO, HNAP

HNAP SetWlanRadioSettings: FW returned “ERROR_BAD_WIDTH” when setting channel bandwidth 40, CBO, HNAP

HNAP SetRouterSettings: FW should not check remote management port if remote management is disabled, CBO, HNAP

HNAP SetWanSettings: FW allows a broadcast gateway address 12.254.169.255, CBO, HNAP

HNAP SetWanSettings: FW accepts blank PPPoE username with non-blank password, CBO, HNAP

DUT should be in WPA2-Mixed mode after WPA/WPA2 configuration by setup wizard, CBO, Setup Wiard

1.00.09

Fixes issue with FTP failure after 2 days
Fixes issue with Cisco IPSec client
Fixes issue with slowdown when using Azureus in MAC OS
Fixes issue with SIP registeration when WAN IP Address changes
Fixes issue with WUSB300N client over WPA-TKIP
Change GUI display

1.00.07

Initial Release

Version number	1.00.10
Release status	Final
Website	Linksys
Download
License type	Freeware