Download Firmware Intel Server Board S2600CW / S2600KP / S2600TP R01.01.0020

Intel has released a new BIOS with new firmware for the motherboards from the Server Board S2600CW-, S2600KP– and S2600TPlines. These motherboards all accommodate two Intel Xeon processors of the type E5-2600 v4. Version numbers are fixed at R01.01.0020 for the BIOS, 03.01.03.043 for the ME firmware, and 01.48.10351 for the BMC firmware. The changes of these expenses are as follows:

System BIOS – R01.01.0020

• CCB 480: To support OEM activation feature in ITK on Grantley
• EPSD 100255536 : Boot order in UEFI mode doesn’t change to default after saving changes and resetting system
• Update ucode 00000039 for E5-2600V3, 0b00001f for E5-2600V4
• Update ME to 03.01.03.043
• CCB 466: To support early VGA video display on Grantley
• EPSD 100035007 The screen which is provided for user to confirm TPM2 clear operation.
• Fix chipsec security Test failed in SMI 0x26, 0x28 and 0xef(BIOS Security enhancement for SMM communication buffer)
• EPSD 100034250 – [E5-2600V4] Slot ID shown in type9 is different from PciSlotTest.efi shown
• CCB488: Provide an option to enable/disable SSC in BIOS Setup Menu
• Update RC to 3.9.0
• EPSD 100035506 : [E5-2600V4] SMBIOS Type 9 structures are wrong on WCP with some riser cards configurations
• EPSD 100035920: System will hang on diagnostic screen when press F2/F6 button continuous under MFG mode
• EPSD 100255932: Fix remote terminal show corrupt BIOS Setup screen when Console Redirection Baud Rate is 9.6k/19.2k/38.4k/57.6k issue

BMC Firmware – 01.48.10351 (Release version)

• EPSD100256480: The fault LED of NvME SSD keep blinking on S2600TP 24HDD system after AC cycle
• EPSD100256247: S2600WT system (LWT2224YXXXX221, LWT2224YXXXX129 ) will hang on post after AC cycle with BIOS R16
• EPSD100255719: APPSOL-31180: Web Server Vulnerable to Redirection Page Cross-Site Scripting Attacks
• EPSD100035907: The HDD fault LED no light and no rebuild event be logged when plug out the HDD from HSBP(G97158-371) and plug back the HDD to rebuild RAID.
• EPSD100256365: [S2600WT]The NVMe HDD can not be detected in EWS web sensor reading interface when install the NVME HDD in the 2nd HSBP’s NVMe slot.
• EPSD100256457: In Redhat grub edit mode Backspace and cursor move operations can’t be consistent between local Screen and remote KVM session’s Screen
• EPSD100035838: Can’t display Simplified Chinese content after EWS was login when language was change to simplified Chinese.
• EPSD100254723: S2600KP BMC FW Health reports HSBP Temp has failed
• none: Fix generic overflow attack on port 5120 and 5123 for cdserver and fdserver
• none: update PSoC to version 1.27
• 01.48.10259 (Internal version)
  • EPSD100255012: [S2600WT] – Riser2 Temp lower issue with A2UL8RISER2
  • EPSD100255833: Linux Kernel vulnerability – Dirty COW attack
  • EPSD100254817: The HSBP’s FRU can’t be detected if install 4 HSBP in WCP system. (Long term solution)
  • EPSD100035118: HDD Fault LED didn’t amber blinking at 1HZ frequence during HDD rebuilding
  • EPSD100033884: The HDD fault LED no light and no rebuild event be logged when plug out the HDD from HSBP(G94339-371) and plug back the HDD to rebuild RAID.
  • none: Upgrade openssh to 7.3
• 01.48.10239 (Internal version)
  • EPSD100035162: LCD shown frusdr version is 1.3a, not 1.13a with BIOS setup.
  • EPSD100255280: BMC Debug Log does not dump IIO configuration in case of ERR2
  • EPSD100255284: BMC Debug Log generation code reads wrong bus to get GFERRST value on socket 1
  • EPSD100034909: It shows the HSBP FW update status as “00 01” by executing the “cmdtool 20 c0 38” command in power off status
  • none: Increase EWS stability after Nessus/Qualys scan
  • none: Update openssl to 1.0.2j

ME Firmware – Issues fixed in 03.01.03.043 release

• Flash from Grantley FW to Grantley-R FW could cause SPS reset.
• System unexpected shutdown with SPS FW exception error.
• ME FW changes P state value when no policy is active imapcting performance.
• C8h command power readings for CPU domain are invalid.

This update is available in the following flavors:

• Intel Server Board S2600CW Firmware Update Package for EFI
• Intel Server Board S2600KP Firmware Update Package for EFI
• Intel Server Board S2600TP Firmware Update Package for EFI