Download Firmware Fujifilm X-H1 2.00

Fujifilm has for its X-H1-digital system cameras released new firmware, with 2.00 as version number. These cameras have an aps-c format CMOS image sensor of 24.3 megapixels and are suitable for lenses with a Fujifilm X mount. This update is approximately 52MB in size and can be loaded onto the camera via a memory card set. The corresponding list of changes looks like this:

The firmware update Ver.2.00 from Ver.1.20 incorporates the following issues:

• In-body image stabilization and optical image stabilization now work together to improve overall stability
  With an XF or XC optical image stabilized lens, in-body image stabilization worked with 3 axis (up and down / optical axis rotation). The remaining 2 axis (right and left pitch, yaw angle) was controlled by optical image stabilization in the lens. This firmware has a new image stabilization algorithm to allow the in-body image stabilization to work in all 5 axis and to achieve more than five-stops (up to the equivalent of 5.5 stops (*1)) image stabilization by cooperative control according to the types of frequency and blur amount. To activate this function, lenses are necessary to be updated to latest firmware version. Please check the latest firmware version from the link below. Camera Body / Lens Firmware Compatibility Table
  *1：Based on CIPA standards. When using XF10-24mmF4 R OIS, XF18-55mmF2.8-4 R LM OIS, and XC16-50mmF3.5-5.6 OIS II. Regarding the image stabilization performance, refer to the list of “Cooperative control by in-body and optical image stabilization with firmware ver.2.00 of X-H1”. Cooperative control by in-body and optical image stabilization with firmware ver.2.00 of X-H1(PDF:8.00KB)
• Improved in-body image stabilization performance
  Eliminate image shake when panning slowly when movie recording or on the live view image.
• Recording over 4GB movie file as one file
  Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB) (*2).
  *2：By using SD memory cards less than or equal to 32GB, movie recording will continue without interruption when the file size reaches 4GB, however subsequent footage will be recorded to a separate file.
  Note：Format SD memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device.
• Display color temperature (Kelvin) on EVF/LCD
  Color temperature (Kelvin) can be displayed on EVF/LCD.
• Display power supply icon
  Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD and Anker PowerCore Speed ​​20000 PD.
• Fix or minor defects.