Download Firmware Fujifilm FinePix X-T1 3.10

Fujifilm has released new firmware for its FinePix X-T1. This high-end system camera has an X-Trans-CMOS II image sensor with 16 megapixels and an EXR II processor, has WiFi on board and can shoot full-HD video. The camera is available in two versions, namely the standard version and the Graphite Silver Edition. Version 3.10 is the first update of version 3.00, which was released earlier this year, in which several new features have been introduced. The changelog for this release looks like this:

The firmware update incorporates the following issues:

• Improvement of the flash function when “MECHANICAL+ELECTRONIC” is selected
  An external non-TTL flash will fire when the “MECHANICAL+ELECTRONIC” is selected in the “SHUTTER TYPE” option of the SHOOTING MENU.
  If “S (Shutter-Priority)” or “M (Manual Exposure)” mode is selected, set the shutter speed to 1/180 sec. or slower.
• Improvement of the Wi-Fi function when “FUJIFILM PC AutoSave” is used
  The phenomenon is fixed that Wi-Fi communication with “FUJIFILM PC AutoSave” stops at the moment the LCD turns off
• Improvement of the display for the “USB MODE” in the SET-UP menu
  • When “PC SHOOT FIXED” is selected, the warning of “IMAGES ARE NOT SAVED IN THE CARD” appears
  • In case that “PC SHOOT FIXED” is selected in the “USB MODE” and the camera is not connected to a PC via a USB cable, you cannot turn off the camera when you turn the ON/OFF switch to the OFF positon or remove the lens from the camera because the camera stays in the waiting mode for image transfer.
    With this upgrade, the message below will appear to confirm whether you stop the image transfer to the PC or not in such operations. If you press “OK” button, the camera will turn off without recording images.