Download Firmware FreshTomato 201.5

By admin On Aug 15, 2021

Spread the love

FreshTomato is Tomato-derived firmware for various Arm or MIPS based routers from ASUS, D-Link, Huawei, Linksys, Netgear, Tenda and Xiaomi. It can be seen as the continuation of ‘Tomato by Shibby’ since this developer, Michał Rupental, wants to devote his time to other projects. Compared to the original firmware from the manufacturer, the FreshTomato firmware adds several extra options, such as a real-time bandwidth monitor and extensive setting options. The developers released the fifth edition of FreshTomato in 2021 and it is available for routers with a Arm– or MIPSCPU.

FreshTomato-ARM 201.5 Changelog

Note: because of changes in GUI, clean your browser cache and/or use Ctrl+F5 (FF) to avoid artifacts.
Add mDNS (avahi) support
Add ZFS support for ‘z’ (AIO) targets (@lancethepants)
kernel: fix from upstream for CVE-2021-22555
Wireless Client Mode: repair that operation mode for SDK6 and up!
SDK6: update ctf (part 3) (for single and dual core)
SDK7: help multiSSID setups
WL SDK6/SDK7: turn On wl setting “probresp_sw” for wireless band steering (BSD)
openvpn: update to 2.5.3
getdns/stubby: update to 1.7.0/0.4.0
ntfs-3g: update to 2021.04.05 (added handling of Windows 8/Windows 10 file systems)
tor: update to 0.4.6.6
tinc: update to 1.1pre18
nano: update to 5.8
sqlite: update to 3.36.0
pcre: update to 8.45
nginx: update to 1.21.1
iperf: update to 3.10
nettle: update to 3.7.3
lilogg: update to 1.3.5
libpng: update to 1.6.37
libvorbis: update to 1.3.7
e2fsprogs: update to 1.46.3
libcurl: update to 7.78.0
wsdd2: update to 1.8.6
vsftpd: update to 3.0.5
libcurl: update CA certificate bundle as of 2021-07-05
GUI: Admin: Access: tweaks Web Admin panel, reorder (thanks @rs232)
GUI: advanced-wireless – adjust name/label for wl country “GB” to GREAT BRITAIN
GUI: Advanced: Virtual Wireless: add Interface status in Details table
GUI: Basic: Network: allow 0.0.0.0 as a valid address (in special cases) for all bridges
GUI: NAS: File Sharing: limit samba workgroup name to 15 chars
GUI: Tools: WOL: also show in the table devices from other than primary bridge
GUI: Status: Device List: fix some issues with disconnected WL devices
GUI: Status: Device List: fix some issues with WDS devices
GUI: Status: Device List: improve IPv6 support
GUI: Status: Device List: add images to Noise Floor level
GUI: Status: Device List: add additional confirmation when deleting lease
GUI: Status: Device List: display Virtual Wireless Interface reference within parentheses like bridges and vlans
GUI: Status: Overview: do not display any virtual interface linked to the chip/frequency that is disabled
GUI: Status: Overview: add a graphic bars to CQI1 and CQI2 LTE strength indicator
GUI: Status: Overview: switch ‘Free’ to ‘Used’, change order
GUI: Status: Overview: add progress bars (thanks @rs232)
GUI: fix a bug when scaling size is less than 10KB
Fix container build on updated Debian 10
busybox: add CONFIG_DIFF to configuration
httpd: buffer overflow protection (snprintf)
httpd: make asp_lanip() multi-lan aware
OpenVPN: bypass CTF (if enabled)
rstats: make it multiwan aware for daily/weekly/monthly history
tinc: run firewall rules after bringing up the vpn. If adding custom routes into the firewall rules, the interface needs to pre-exist
transmission: fix when run without auth
TTB: v3.02 change default URLs and add URL redundancy/randomisation; thanks to @rs232
rc: do not restart nas services/wsdd2 on WAN up (fixed in recent wsdd2 update)
rc: firewall.c: make NAT loopback work if CTF is enabled
rc: init.c: set unique machine-id during init
rc: mwan.c: don’t log multiwan status update continually
rc: nginx.c: add svg/svgz support
rc: nginx.c: add h5ai support (
rc: transmission.c: TCP buffers tune, lost in one of the previous commits
rc: services.c: add logging when starting/stopping httpd
rc:services.c:avahi:improve generated config
Netgear R6250 – adjust LED table (logic fix for logo LED, was inverted)
Netgear R6300v2 – adjust LED table (logic fix for logo LED, was inverted)

FreshTomato-MIPS 2021.5 Changelog

Note: because of changes in GUI, clean your browser cache and/or use Ctrl+F5 (FF) to avoid artifacts.
Add mDNS (avahi) support
Wireless Client Mode: repair that operation mode for SDK6 and up (unfortunately, it doesn’t work yet for RT-AC)
openvpn: update to 2.5.3
getdns/stubby: update to 1.7.0/0.4.0
ntfs-3g: update to 2021.04.05 (added handling of Windows 8/Windows 10 file systems)
tor: update to 0.4.6.6
tinc: update to 1.1pre18
nano: update to 5.8
sqlite: update to 3.36.0
pcre: update to 8.45
nginx: update to 1.21.1
iperf: update to 3.10
nettle: update to 3.7.3
lilogg: update to 1.3.5
libpng: update to 1.6.37
libvorbis: update to 1.3.7
e2fsprogs: update to 1.46.3
libcurl: update to 7.78.0
wsdd2: update to 1.8.6
vsftpd: update to 3.0.5
libcurl: update CA certificate bundle as of 2021-07-05
GUI: Admin: Access: tweaks Web Admin panel, reorder (thanks @rs232)
GUI: advanced-wireless – adjust name/label for wl country “GB” to GREAT BRITAIN
GUI: Advanced: Miscellaneous: update note about Broadcom FastNAT checkbox
GUI: Advanced: Virtual Wireless: add Interface status in Details table
GUI: Basic: Network: allow 0.0.0.0 as a valid address (in special cases) for all bridges
GUI: NAS: File Sharing: limit samba workgroup name to 15 chars
GUI: Tools: WOL: also show in the table devices from other than primary bridge
GUI: Status: Device List: fix some issues with disconnected WL devices
GUI: Status: Device List: fix some issues with WDS devices
GUI: Status: Device List: improve IPv6 support
GUI: Status: Device List: add images to Noise Floor level
GUI: Status: Device List: add additional confirmation when deleting lease
GUI: Status: Device List: display Virtual Wireless Interface reference within parentheses like bridges and vlans
GUI: Status: Overview: do not display any virtual interface linked to the chip/frequency that is disabled
GUI: Status: Overview: add a graphic bars to CQI1 and CQI2 LTE strength indicator
GUI: Status: Overview: switch ‘Free’ to ‘Used’, change order
GUI: Status: Overview: add progress bars (thanks @rs232)
GUI: fix a bug when scaling size is less than 10KB
Fix container build on updated Debian 10
busybox: add CONFIG_DIFF for ‘AIO’ and ‘Mega-VPN’ targets
httpd: buffer overflow protection (snprintf)
httpd: make asp_lanip() multi-lan aware
rstats: make it multiwan aware for daily/weekly/monthly history
tinc: run firewall rules after bringing up the vpn. If adding custom routes into the firewall rules, the interface needs to pre-exist
transmission: fix when run without auth
TTB: v1.02/v3.02 change default URLs and add URL redundancy/randomisation; thanks to @rs232
rc: do not restart nas services/wsdd2 on WAN up (fixed in recent wsdd2 update)
rc: init.c: set unique machine-id during init
rc: mwan.c: don’t log multiwan status update continually
rc: nginx.c: add svg/svgz support
rc: nginx.c: add h5ai support (
rc: transmission.c: TCP buffers tune, lost in one of the previous commits
rc: services.c: add logging when starting/stopping httpd
rc:services.c:avahi:improve generated config

Version number	2021.5
Release status	Final
Website	FreshTomato
Download
License type	GPL