Download Firmware Draytek Vigor2760 Delight 3.8.7

Draytek has for his Vigor2760 Delight-routers released new firmware. These vdsl2/adsl2+ routers have four gigabit ethernet LAN ports, one of which can also be used as a gigabit ethernet LAN port. In addition, the router can set up two VPN tunnels and there are two USB ports available. Furthermore, there is the choice to take the Vigor2760 without wireless capabilities or with 802.11n, in the form of the Vigor2760n or the Vigor2760Vn, the latter also containing VoIP capabilities. The version number has landed at 3.8.7 and here are the changes:

New Features

• Add an option to disable / enable “EAPOL Key Retries” (Wireless LAN(2.4GHz)>>Security Settings), so system administrator can configure EAPOL retries.
• Support VoIP >> Diagnostics.
• Support IKEv2 for IPsec tunnel in LAN to LAN.
• Support Console to Telnet.
• Support backup/restore config for firewall.
• Support Firewall >> Diagnostics.
• Support backup/restore config by USB.
• Add SNMP Server to WAN/LAN Access Control.
• Support RIP over PPPoE.

Improvement

• Improved: Avoid downloading “ipobject.csv” file when remote management is enabled.
• Improved: Send Syslog during 4-way handshaking of 2.4G wireless connection to help identify “EAPOL Key Retries” action.
• Improved: A warning message will be popped up when management from LAN is disabled.
• Corrected: DNS Filter Administration Message wasn’t displayed after changing Vigor’s management port number.
• Corrected: Ping Diagnosis tool did not work properly.
• Corrected: VDSL connection could not get showtime with VT4 modem code.
• Corrected: Failed to authenticate L2TP over IPsec VPN connection by customer’s LDAP server.
• Corrected: Open ports did not work but port redirection and DMZ worked fine.
• Corrected: DDNS Syslog showed “WAN IP not present!” even the WAN was up and got the IP address.
• Corrected: SSL VPN could not be established when server certificate authentication was enabled with Android 7 devices.
• Corrected: Port Redirection/Open port/DMZ failed after Session Limit was enabled.
• Corrected: Data flow monitor showed external/destination IP traffic after a H2L L2TP over IPsec was connected.
• Corrected: Failed to upgrade firmware with firmware upgrade utility 3.6.6 or MFUU 1.5.1.
• Corrected: Customized default configuration overwrote the default WPA PSK Key.
• Corrected: Outbound SIP call disconnected after specific ITSP was used for 20 seconds.