Download Firmware Asus WL-500g 1.8.1.7

On the Asus website you can score a new firmware for the WL-500g wireless router. As the ‘g’ indicates, this router supports the 802.11g protocol and can transfer data at a maximum speed of 54Mbps. It is important that the default values ​​are loaded after flashing the firmware. This can be done by pressing the hardware reset button on the back. The changelog shows the following changes:

Changes:

• Add: BigPond Service
• Add: Connect/Disconnect for PPPoE/PPTP/Static/BigPond Connection Type, For WAN die issue, allow pressing “Connect” manaully to reset WAN phy
• Add: Save/Clear Log
• Add: Password checking option for Web Cam
• Add: Init script option when USB Disk is inserted
• Change: For PPPoE in heavy uploading, when idle time out is set to 0, disable LCP ECHO Request,
• Fix: Specified destination ip or UPnP port forwarding
• Add: StartCraft Patch
• Add: Limited Client mode – Only one device behind that etherent bridge is allowed.
• Change: Separate functions for SPI Firewall and Filter. And disabling Firewall, port for HTTP/LPR/PING will be opened.
• Add: Afterburner(WL500gx only)
• Add: WPA-PSK/WEP at the same time
• Add: TKIP/AES at the same time(WL500g/WL500gx only)
• Add: WPA-PSK for WDS
• Add: AP-Isolated, prevent wireless client communicating with each other
• Add: NTP with NTP server name
• Add: Save UPnP forwarding entries into flash.
• Add: UPnP advertisement for IGD
• Add: Log entries for USB storage and Web Cam
• Add: Another http port(7776) for Web camera viewing without password checking UI relayout for Wireless and Firewall[break]