Cases reveal design Huawei P30 and P30 Pro

Case maker Spigen has put product pages online with renders of its covers for the Huawei P30 and P30 Pro smartphones. As a result, the case maker reveals the suspected design of both high-end devices.

The renders that GSMArena found on Spigen’s site show a phone with a notch in the shape of a water drop. The screenshot shows the date March 28. That is in line with previous information about the announcement, because according to Huawei, it will take place at the end of March.

According to the renders on the product page, the P30 has three cameras under each other and the flash below, while the P30 Pro on the product page has four cameras and a flash next to it. There is no fingerprint scanner on the housing, so it is probably behind the screen. The current Mate 20 Pro has that too. The notch does not seem to accommodate a 3D face scanner. The P30 seems to have an extra opening on the bottom; that could indicate a 3.5mm jack, something that predecessor P20 does not have.

Huawei itself has not confirmed anything about the upcoming smartphones. The phone maker releases its P smartphones every spring. The renders do not mention anything about specs or prices of the phones.