Download Cura 5.7.0 beta 1

Cura was developed by UltiMaker to make 3D printing as easy and streamlined as possible. Cura contains everything you need to print a 3D file. It works with all UltiMaker printers, as well as those from RepRap and Printrbot. Cura is easy to install and contains both the latest firmware and the calibration files for the 3D printer. The first beta release of Cura version 5.7.0 has been released and the following changes and improvements have been made:

New features and improvements

Universal Cura Project files

Universal Cura Project files contain models and settings and can be shared with people who have different printers. They can be used on any printer and they allow you to include positional data for the models on your build plate as well as select settings. Visit us Thingiverse page to download this amazing Dinosaur SD Card Holder to try the ease of sharing settings yourself.

Newly introduced Settings

• Settings that define the raft offset for top, middle and bottom raft layers
• Brim only on the inside setting, resolves #2853
• Introduced a new Prime tower type: Interleaved, next to the current Normal
• Apply Monotonic ordering to the Raft Top Surface
• Raft Wall Line Count for the Bottom, Middle, and Top of the raft
• Allowing to define print sequence manually

MethodX and MethodXL specific improvements

• Enabled Print over Cloud for UltiMaker MethodX and Method XL printers
• Introduced ASA, SR30, and Nylon12-CF profiles for MethodX and Method XL Printers
• Improved the predicted printing time so it's closer to the actual printing time on the MethodX and MethodXL
• Improved the idle nozzle temperature for dual extrusion printing on MethodX and MethodXL
• Resolved a crash for the Method printer when navigating to the Monitor tab
• Improved the way that the fan speeds were listed and controlled for MethodX and MethodXL printers
• Updated Raft settings for UltiMaker MethodX and MethodXL
• Enabled Monotonic Raft Surface to improve adhesion
• Increased the Minimum Retract Distance to improve infill pattern wall overlaps

The new materials for the Method Series only become available with a firmware update. Currently, the firmware that supports the new materials on the Method series is not available yet. We are working hard to make it available as soon as possible.

Other improvements

• Introduced an analyzing tool in the cura engine to better track slicing crashes, and started fixing the biggest reports coming in.
• The play speed of the nozzle in the preview is now closer to the movement of the printhead
• Introduced an option to choose Drop Model to Buildplate every time a project file is loaded
• Introduced DisplayInfoOnLCD Post Processing Script which combines DisplayFilenameAndLayerOnLCD with DisplayProgress
• Introduced alternative camera navigation similar to FreeCAD Trackpad

Bug fixes

• Resolved significantly slower slicing for models with a lot of holes
• A significant amount of crashes have been resolved that are caused by self intersecting polygons
• Align to Buildplate did not work for grouped meshes, resolves #14237
• The models in a 3mf file would not load in their saved position, please note that this also changes the behavior of the “import models” feature of a 3mf file, for this feature the saved model location will be ignored
• Reduced the amount of floating support in areas near the support overhang angle threshold
• Fixed a bug with the Initial Extruder Number in the start gcode, resolves #17501
• Fixed a bug where Z could be negative if Remove Empty Layers was enabled, resolves #15975
• Pressing the Esc key now doesn't exit full screen mode
• Improved the OAuth protocol to improve signing in with plug-ins
• Fixed tree support-related crashes if there are no overhangs
• Fixed some slicing crashes with tree support
• Fixed available height when adding modifier mesh in One at a Time printing
• Improved behavior for loading 3mfs by giving the models original names
• Added an error so LimitXYAccelJerk doesn't run unless Accel Control is enabled in Cura
• Some helpful code cleanup

Profiles and materials:

• Introduced high-speed profiles for the layer heights <0.15mm for Ultimaker PLA, T-PLA, ABS and PETG.
• Updated Initial Layer Speed ​​settings for UltiMaker S3, and UltiMaker S5
• Updated the Shrinkage Factor for PET CF to improve dimensional accuracy
• Improved self-support settings for UltiMaker Materials
• Renamed UltiMaker PP Transparent to UltiMaker PP Natural
• Increased part strengths of high-speed modes by compensating for slip in high flow rates
• Improved adhesion settings for UltiMaker ABS

New and updated printers

• Introduced Elegoo Neptune 4 Plus and Max, and updated Elegoo Neptune 4 and Pro
• Introduced Anycubic Kobra 2 Printer Definition
• Introduced Flying Bear Ghost 6
• Introduced Creality Ender 3 V2 Neo
• Introduced Dagoma Sigma Pro 500z, and Dagoma Sigma Pro 500z Dual
• Introduced RRatRig V-Core 3, 200mm, 300mm, 400mm, 500mm and RatRig V-Minion
• Introduced Flashforge Adventurer 3 (AD3 / AD3C / AD3 Lite / AD3 Pro) & Adventurer AD4, and AD4 Lite
• Updated the dimensions for Ender 3 V3 S
• Updated start Gcode for creality_ender3v3se & Anycubic Kobra Go/Kobra 2
• Updated print and retraction settings for Sovol 3D printers
• Updated Creality Ender 5 Plus Bed Leveling Command
• Updated Voron definition to support Voron/Klipper