Download Driver For ATi Catalyst 6.5

Spread the love

ATi has just released the fifth version of this year’s Catalyst drivers. The drivers have therefore been given version number 6.5 and are available for Windows XP, Windows Media Center Edition and the 64-bit version of Windows XPthe Windows 2000 driver is since version 6.2 no longer updated. This release includes a revamped Overlay Theater Mode, Adaptive Anti-Aliasing can be used on the Radeon 9500 and above and, in addition to a lot of bug fixes, speed improvements can also be expected in Unreal Tournament 2004 and Splinter Cell. Unfortunately, the list of known issues is at least as long:

New Features

  • Overlay Theater Mode Update
  • Adaptive Anti-Aliasing for ATI Radeon 9500 and above

Performance Improvements

  • Up to 23% gain in UT2004
  • Up to 20% gain in Splinter Cell

Issues Resolved in Catalyst Software Suite 6.5

  • 3DMark05: Running the application with CrossFire enabled and then attempting to hot un-plug and then hot-plug the CRT no longer results in 3DMark05 failing to respond.
  • Aquamark 3: Exiting the Start Measurement benchmark test once it is complete no longer results in the display device displaying a black desktop image with only the mouse cursor being available.
  • Doom 3: Beginning a new game and selecting the shotgun in the give all console no longer results in corruption being noticed when Ultra Quality is disabled in the in game video quality settings.
  • Far Cry: Installing the v1.33 patch and selecting D3D along with setting the display to 1024×768 English no longer results in the operating system failing to respond when running the benchmark.
  • Catalyst Control Center: Enabling clone mode no longer results in the refresh rate being locked at 60Hz when using an ATI Radeon X700 series product.
  • The MCE encoder no longer fails to install after the installation of the ATI display driver, WDM driver, and MMC software.
  • The display device no longer fades to black when attempting to do an inf install of the display driver.
  • Connecting a CRT and disconnecting a TV followed by entering suspend mode and disconnecting the CRT no longer results in the LCD display failing to resume from suspend mode.
  • Disconnecting a TV and connecting a CRT while in hibernation mode no longer results in the CRT failing to display an image when resuming from hibernation mode.
  • Connecting a Sharp 32 inch LCD TV using the DVI connector no longer results in the a display mode of 659×496 being displayed when setting the display to 640×480.
  • Catalyst Control Center: Advanced Mode: Incorrect text and cropped text is no longer noticed when selecting Japanese as the language for the Catalyst Control Center.
  • Clicking Start->All Programs->Catalyst Control Center->Advanced->Catalyst Control Center no longer results in the Catalyst Control Center Basic View launching.
  • The HDTV formats list no longer becomes empty after changing the display mode from extended desktop mode to clone mode.
  • The Windows MCE operating system no longer fails to respond when doing a TV channel scan when using an ATI All-In-Wonder X1900 (PAL).
  • A .net 2.0 error message is no longer displayed during the installation under the Windows 2000 SP4 Chinese version.
  • Using the Catalyst Control Center to change the skin to the ATI Catalyst Crimson no longer results in the ATI Quicksilver skin being applied.
  • Running the automated clock configuration utility found in the Overdrive aspect page of the Catalyst Control Center no longer results in the operating system failing to respond.
  • Enabling Picture-in-picture no longer results in the windowed TV image failing to respond when changing the TV channel.
  • Catalyst Control Center: A VPU Recover warning window no longer fails to be displayed when an ASIC reset occurs.
  • Catalyst Control Center: Connecting a secondary CRT display device no longer results in the LCD display device failing to display an image after completing the Catalyst Control Center->Easy Setup Wizard.
  • Applying the Custom settings found in the CV aspect page of the Catalyst Control Center no longer results in the custom setting being lost when the system is rebooted.
  • Running SFR in 720p on a system containing an ATI Radeon X1800 series no longer results in line corruption being noticed when CrossFire is enabled.
  • Connecting a TV and a CRT to a system containing an ATI Xpress 200 series no longer results in the secondary LCD being display when shutting down and disconnecting the TV.
  • The operating system no longer fails to respond when connecting a DVO dongle to an ATI Radeon 7000 series.
  • Adding a new custom HDTV mode no longer results in the custom mode not being available in the Catalyst Control Center Display Manager.
  • The predefined HDTV modes are no longer missing from the CV aspect page in the Catalyst Control Center.
  • Catalyst Control Center: Enabling clone mode may result in the refresh rate being locked at 60Hz when using an ATI Radeon X700 series product.
  • The display mode of 1024×768@60Hz is now included in Catalyst Control Center for component video output.
  • The HDTV Support aspect is now available under the Monitor Properties when using Advanced View in the Catalyst Control Center.
  • Connecting an HDTV using the CV dongle and setting the power option to turn the monitor off after one minute no longer results in the HDTV failing to resume.
  • An HDMI detection message is now displayed when hot plugging an HDMI display device.
  • Catalyst Control Center: Truncated and cut-off text is no longer noticed in various supported languages.
  • Black cubes and fog function no longer fail when testing GLView.
  • Two error messages are no longer displayed in the event viewer after the installation of the driver.
  • Using the hot-key function to change an LCD display panel setting no longer results in the LCD Panel Properties found in the Catalyst Control Center failing to be updated with the current setting.
  • Catalyst Control Center: Basic View: Enabling Use Advanced view 3D settings in the 3D Quality and Performance Setting no longer results in the Catalyst Control Center reverting back to Use Basic 3D setting below.
  • Connecting a CRT to a system containing an ATI Xpress 200 series and toggling between a full screen DOS session and Windows, no longer results in vertical lines appearing on the secondary display device.
  • The operating system no longer restarts multiple verdana after unplugging the power cable to the slave card and using only the master card.
  • Using the composite connectors to connect a CRT and TVout to an ATI Radeon X1600 or 1300 no longer results in the TVout failing to display the desktop image when attempting to resume from hibernation mode.
  • NaviSet V1.1.10: Connecting an NEC display device to an ATI Radeon X1600 series may result in the Monitor Adjustment dialog box stating No DDC/CI monitors detected.
  • The Catalyst Control Center TV Properties no longer lists H/PAL as an appropriate, third format for countries that do not support this format.
  • An un-necessary hyphen next to the Go to ATI.com option found in the German version of the Catalyst Control Center is now removed.
  • Connecting two display devices using a DVI-CRT and DVI-CV dongles no longer results in extended desktop mode failing to be applied.
  • The submenu Formats fields found in the TV Properties are no longer blank when setting the TV standard to PAL within the Catalyst Control Center.

Known Issues for Catalyst Software Suite 6.5

  • Alias ​​MotionBuilder 6: Loading a model in MB6, followed by rotating the object, may result in shadows appearing corrupt and flickering being noticed.
  • Anarchy-Online: Screen corruption may be noticed when walking or running through the terrain.
  • AutoCAD 2005: Using the 3DORBIT command to rotate or zoom may result in the display hanging for a few seconds when having hardware acceleration enabled in AutoCAD and a 3D object in the drawing.
  • AutoCad 2006: Corruption may be noticed when moving the mouse pointer around the desktop area.
  • Cold War: Playing the game with the display resolution set to 1600×1200 along with AA set to 8x and CrossFire enabled may result in a ghosting effect being noticed.
  • F1 Racing Championship: Playing the game on a system containing an ATI Xpress 200 series may result game not running smoothly.
  • Lord of the Rings: The Battle for Middle Earth: Playing the game under Windows XP SP2 using an ATI Radeon X800 series product may result in intermittent display corruption being noticed.
  • Neverwinter Nights: Playing the game under Windows XP on a system containing an ATI Radeon X800 series, may result in the game exiting to the Windows desktop and an error message being displayed.
  • Path of Neo: Texture corruption may be noticed when playing the Kung Fu level.
  • Vulpine GLMark: Running the application on a system running Windows MCE, and containing an ATI Xpress 200 series may result in the display device failing to display an image when attempting to set the display resolution to 1024×768 32bpp.
  • World of Warcraft: Enabling CrossFire may intermittently result in the character appearing off center
  • The Apply button in the Custom settings of the Advanced mode, found within the Catalyst Control Center Video standard settings, is grayed out when playing a media file.
  • Connecting an HDTV to an ATI Radeon X700 series may result in the HDTV being detected as a CRT or TV under the Windows XP operating system.
  • The PAL FM fine tuning algorithm is currently using 200 MHz bandwidth which may overlap FM channels resulting in the same FM channel being found several verdana during the scan function.
  • Launching the Adobe Gamma calibration application and moving the gamma slider back and forth, may result in the Task Manager being filled with cli.exe until the system becomes low on memory.
  • Connecting two display devices to an ATI Radeon X1600 series product may result in the device manager failing to detect the secondary display device.
  • Display corruption may be noticed when configuring the DTV channel to 1080i broadcast when using an ATI HDTV Wonder.
  • The LG P42SX DVI-D display device fails to display an image when connected to an ATI Radeon 9000, ATI Radeon 9200, or an ATI Radeon 9250.
  • OpenGL Extension Viewer: 2.0: Running the Rendering tests may result in a black box appearing when the fog option is enabled.
  • Connecting an HDTV as the secondary display device and enabling Theater mode may result in HDTV failing to display an image when attempting to playback a movie with extended desktop mode enabled.
  • The IBM T84H display device may fail to display an image when connected to the DVI connector on the ATI Radeon X800 or X850 series.
  • Attempting to re-enable any display device other than the primary or secondary display device that has been disabled by CrossFire, may result in the operating system failing to respond.
  • Installing the a newer version of the Catalyst Control Center over top of a previous installation of the Catalyst Control Center may result in the installation of the Catalyst Control Center taking a long time to complete.
  • Catalyst Control Center: Connecting a display device capable of displaying a resolution of 1680×1050 to an ATI Radeon X1900 may result in the display mode of 1680×1050 not being available in the Display Manager aspect.
  • Using the ATI Multimedia Center to watch TV may result in the operating system restarting when using an ATI Radeon X1800 series product.
  • The Record function currently fails to work when using an ATI All-In-Wonder X1300 with time-shifting enabled.
  • Using the ATI Multimedia Center to watch TV may result in the operating system restarting when using an ATI Radeon X1800 series product.
  • The Record function currently fails to work when using an ATI All-In-Wonder X1300 and time shifting is enabled.
  • Creating a customized display mode of 720p50 may result in the customized mode failing to be deleted.
  • Using Catalyst 6.3 or higher along with the MMC version 9.13 and performing a TV channel scan may result in some higher TV channels failing to be detected.

[break]

Version number 6.5
Operating systems Windows XP, Windows XP x64, Windows XP Media Center 2005
Website ATi
Download
File size

34.50MB

License type Freeware
You might also like