Download Firmware Linksys WAG160N 1.00.10

Spread the love

Linksys has released new firmware for the WAG160N router. The update can be recognized by version number 1.00.10 and has been this link click to download bin file. In version 1.00.10, a dozen improvements have been made, including in the WAG160N’s WAN and WLAN software. The full changelog looks like this:

1.00.10

  • HNAP: FW writes settings back to flash when doing HNAP Getxxx.
  • Outbound SIP call dropped in 25 seconds at sipphone.com, CBO, SIP.
  • Web administrator username should be case insensitive, CBO, username
  • HNAP SetMACFilter2: FW allows a multicast MAC address FF:0B:DC:6F:FE:01, CBO, HNAPHnap wireless channel issue
  • HNAP SetMACFilter2: FW allows duplicated MAC addresses, CBO, HNAP
  • HNAP SetWlanRadioSettings: FW returned “ERROR_BAD_WIDTH” when setting channel bandwidth 40, CBO, HNAP
  • HNAP SetRouterSettings: FW should not check remote management port if remote management is disabled, CBO, HNAP
  • HNAP SetWanSettings: FW allows a broadcast gateway address 12.254.169.255, CBO, HNAP
  • HNAP SetWanSettings: FW accepts blank PPPoE username with non-blank password, CBO, HNAP
  • DUT should be in WPA2-Mixed mode after WPA/WPA2 configuration by setup wizard, CBO, Setup Wiard
  • 1.00.09

    • Fixes issue with FTP failure after 2 days
    • Fixes issue with Cisco IPSec client
    • Fixes issue with slowdown when using Azureus in MAC OS
    • Fixes issue with SIP registeration when WAN IP Address changes
    • Fixes issue with WUSB300N client over WPA-TKIP
    • Change GUI display

    1.00.07

    • Initial Release

    Version number 1.00.10
    Release status Final
    Website Linksys
    Download
    License type Freeware
    You might also like